Zanussi ZDT22003FA Manual do Utilizador

GETTING STARTED?EASY.User ManualZDT22003FAEN User ManualDishwasher

ADDING MULTI-TABLETS212030• Do not fill the salt container and the rinse aid dispenser.• Set the rinse aid dispenser to the lowest position.SETTING AN

HINTS AND TIPSGENERALThe following hints will ensure optimal cleaning anddrying results in daily use and also help to protectthe environment.• Remove

UNLOADING THE BASKETS1. Let the tableware cool down before youremove it from the appliance. Hot items can beeasily damaged.2. First remove items from

Follow carefully the instructions on thepackaging of the product.TROUBLESHOOTINGIf the appliance does not start or it stops duringoperation, before yo

Problem and alarm code Possible cause and solutionThe program lasts too long. • If the delayed start option is set, cancel the delaysetting or wait fo

Problem Possible cause and solutionThere are whitish streaks or blu-ish layers on glasses and dishes.• The release quantity of rinse aid is too much.

Refer to "Before first use", "Dailyuse" or "Hints and tips" for otherpossible causes.TECHNICAL INFORMATIONDimensions Wid

17

18

19

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

WWW.ZANUSSI.COM/SHOP156914930-A-202017

• Put the cutlery in the cutlery basket with the sharp endspointing down or put them in the cutlery drawer in a horizontalposition with the sharp edge

• Do not put flammable products or items that arewet with flammable products in, near or on theappliance.SERVICE• Contact the Authorised Service Centr

CONTROL PANEL453211On/off button2Programme indicators3Indicators4Programme button5Delay buttonINDICATORSEnd indicator.Salt indicator. It is always off

ProgrammeDegree of soilType of loadProgramme phasesConsumption values1)Duration(min)Energy(kWh)Water(l)3)Fresh soilCrockery andcutlery• Wash 60 °Cor 6

As the appliance stores the saved settings, there is no need to configure it before every cycle.ADJUSTING THE WATER SOFTENER1. While the appliance is

By default, AirDry is activated with all programmes excluding (if applicable) but it is possible todeactivate it.While the drying phase operates, th

Before the first use, put one litre of water in the salt container.CAUTION!Water and salt can come out of the salt container during filling. To preven