Zanussi ZWH7120P Manual do Utilizador

ENUser manualWashing MachineZWH 7120 PZWH 7140 PZWH 7160 P

Tie the plastic hose guide to the tap with astring to prevent that the drain hose unhookswhen the appliance is emptying.• Onto a sink outlet spigot.Pu

Connections overview~max.400 cmmin. 60 cmmax. 100 cm0.5 bar (0.05 MPa)8 bar (0.8 MPa)min. 60 cmmax. 100 cmIn the interest of the environmentThe applia

Warning! The appliance is supplied witha 13 amp plug attached. Use a 13 ampASTA approved (BS 1362) fuse if it isnecessary to change the fuse in the pl

Before Loading The LaundryImportant! Makesure that no metalobjects are left in thelaundry (e.g. hairclips, safety pins,pins). Button up pil-lowcases,

Close the door gentlyWarning! Makesure that anyfabrics were not trap-ped when closing thedoor.Detergents and additivesGood washing results also depend

PUSHREMOVETO CLEANPUSHREMOVETO CLEANIf the flap is not in the desired position:• Remove the drawer. Push the drawer edgeoutwards where indicated by th

Measure out the fabric softenerPour fabric softeneror any additives intothe compartmentmarked (do notexceed the «MAX»mark in the drawer).Any additive

1Programme selector di-alSpecials CottonsCottons+PrewashSyntheticsMixed FabricDelicatesWoolHandwashRinseDrainSpinEasy IronBlanketMini 30JeansTurn the

5Super Quick By pressing this button the corresponding pilot light illumi-nates.Short cycle for lightly soiled items or for laundry which needsonly fr

•Incorrect option selectionIf an option which is not compatible with the set wash pro-gramme is selected, the message Err is displayed at thebottom

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _

9Start/ PauseStart /PauseStart the programme by pressing the button 9• To start the selected programme, press the button 9, thecorresponding green pil

the door open to prevent the formation of mil-dew and unpleasant smells.Warning! If there are children or pets inthe house, activate the child safety

Programme - Maximum and Minimum Temperature -Cycle Description - Maximum Spin Speed - MaximumFabrics Load - Type of LaundryOptionsDetergentCompartment

Programme - Maximum and Minimum Temperature -Cycle Description - Maximum Spin Speed - MaximumFabrics Load - Type of LaundryOptionsDetergentCompartment

The water temperature of the washing phase may differ from the temperature declared for the selectedprogramme.Consumption valuesThe data of this table

Care and cleaningWarning! Switch the appliance off and re-move the mains plug from the socket beforeany cleaning action.Maintenance WashWith the use o

• open the filter cov-er by pressing thespecial hook andby rotating the cov-er upwards;Warning! Keepthe filter coveropen until the filter re-moval.• b

What to do if…The appliance does not start or stops duringoperation. Certain problems are due to lack ofsimple maintenance or oversights, which canbe

Fault code and malfunc-tionPossible cause / SolutionDoor openThe door has not been closed or is not closed properly.• Close firmly the door.The applia

Malfunction Possible cause / SolutionThe door will not open:The programme is still running.• Wait the end of washing cycle.The door lock has not been

• Obey the maximum load volume of 7 kg (refer to the “Programmechart” chapter).• If the supply cord is damaged, it must be replaced by the manu-factur

Mod. ... ... ...Prod. No. ... ... ... Ser. No. ... ... ...Mod. ... ... ...Prod. No. ... ... .. Ser. No. ... ... ...M

31www.zanussi.com

www.zanussi.com/shop 192987382-A-362012

This appliance complies with the E.E.C. Di-rectives.Water connection• Make sure not to cause damage to the waterhoses.• The appliance is to be connect

7. screw the water inlet hose to the tap andthe drain hose to the rear of the applianceagain;When you intend to start the appliance upagain, make sure

Product description1 2 3456119109987121 Detergent dispenser drawer2 Worktop3 Control panel4 Door opening handle5 Rating plate (on the inner edge)6 Fro

Technical dataDimensions WidthHeightDepth60 cm85 cm54 cmElectrical connection Information on the electrical connection is given on the rating plate, o

• Remove the polystyrene base from the bot-tom.• Return applianceto it's upright posi-tion.• Open the door andremove the plastichose guide, theba

Positioning and levellingx 4Level the appliance by raising or lowering thefeet.The appliance MUST be level and stable on aflat hard floor. If necessar