Zanussi ZCG61211WA Manual do Utilizador descarregar pdf (Página 21)

Gas burners for LPG G30 28-30 mbar

BURNER NORMAL

POWER kW

REDUCED

POWER kW

INJECTOR

MARK 1/100

mm

NOMINAL GAS

FLOW g/h

Rapid 3,0 0,72 88 218,14

Semi-rapid 2,0 0,43 71 145,43

Auxiliary 1,0 0,35 50 72,71

Oven 2,7 0,90 80 196,33

Grill 1,9 - 71 138,16

Gas burners for LPG G31 37 mbar

BURNER NORMAL

POWER kW

REDUCED POWER

kW

INJECTOR

MARK 1/100

mm

NOMINAL GAS

FLOW g/h

Rapid 3,0 0,72 88 214,24

Semi-rapid 2,0 0,43 71 142,83

Auxiliary 1,0 0,35 50 71,41

Oven 2,7 0,9 80 192,82

Grill 1,65 - 71 117,83

Gas Connection

Before installation take off the sticker, which is

on the gas pipe at the back of the appliance.

Clean the pipe from any glue remains.

Use a fixed connections or use a flexible

stainless steel pipes in compliance with the

regulation in force. If you use flexible metallic

pipes, make sure they do not come in touch

with mobile parts and they are not squeezed.

WARNING!

The gas connection pipe must not

touch the part of the appliance

shown in the illustration.

Flexible nonmetal pipes connection

If you have an easy access to the connection,

you can use a flexible pipe. The flexible pipe

must be tightly attached by clamps.

In installation always use the pipe holder and

the gasket. The flexible pipe can be applied

when:

• it can not get hotter than room temperature,

higher than 30 °C;

• it is not longer than 1500 mm;

• it has no narrowing anywhere;

• it is not twisted or tighten;

• it does not get in touch with sharp edges or

corners;

• it's conditions can be easily checked.

When checking the flexible pipe make sure:

• it does not show cracks, cuts, marks of

burnings on the two ends and on its full

length;

• the material is not hardened, but shows its

correct elasticity;

• the fastening clamps are not rusted;

www.zanussi.com 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comentários a estes Manuais

Sem comentários