Zanussi ZCG61276XA Manual do Utilizador descarregar pdf (Página 19)

REPLACING THE LAMP

WARNING! Risk of electric shock.

The lamp can be hot.

1. Turn off the oven.

Wait until the oven is cooled down.

2. Disconnect the oven from the mains.

3. Put a cloth on the bottom of the cavity.

The back lamp

1. Turn the lamp glass cover to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C heat-

resistant lamp.

4. Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

WHAT TO DO IF...

Problem Possible cause Remedy

There is no spark when you try

to activate the spark generator.

The hob is not connected to an

electrical supply or it is con-

nected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the connection

diagram.

There is no spark when you try

to activate the spark generator.

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

There is no spark when you try

to activate the spark generator.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep

the spark generator activated

for equal or less than 10 sec-

onds

The flame ring is uneven. Burner crown is blocked with

food residues.

Make sure that the injector is

not blocked and the burner

crown is clean.

The burners do not work. There is no gas supply. Check the gas connection.

The appliance makes noises. Some metal parts of the appli-

ance expand and contract

when they heat up or cool

down. The noises are normal.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comentários a estes Manuais

Sem comentários

Zanussi ZCG61276XA Manual do Utilizador Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Zanussi ZCG61276XA