Zanussi ZCG92396XA Manual do Utilizador descarregar pdf (Página 21)

Problem Possible cause Remedy

There is no spark when you try to

activate the spark generator.

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

There is no spark when you try to

activate the spark generator.

Burner cap and crown are placed

incorrectly.

Place the burner cap and crown

correctly.

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep the

spark generator activated for

equal or less than 10 seconds

The flame ring is uneven. Burner crown is blocked with

food residues.

Make sure that the injector is not

blocked and the burner crown is

clean.

The burners do not work. There is no gas supply. Check the gas connection.

The appliance makes noises. Some metal parts of the appli-

ance expand and contract when

they heat up or cool down. The

noises are normal.

The flame colour is orange or yel-

low.

The flame can look orange or yel-

low in some areas of the burner.

This is normal.

The oven does not heat up. The oven is deactivated. Activate the oven.

The lamp does not operate. The lamp is defective. Replace the lamp.

Steam and condensation settle

on the food and in the cavity of

the oven.

You left the dish in the oven for

too long.

Do not leave the dishes in the

oven for longer than 15 - 20 mi-

nutes after the cooking process

ends.

The oven does not heat up. The clock is not set. Set the clock.

The oven does not heat up. The necessary settings are not

set.

Make sure that the settings are

correct.

The turnspit does not rotate. The turnspit is not correctly in-

stalled into the turnspit hole.

Refer to "Using the turnspit".

It takes too long to cook the

dishes or they cook too quickly.

The temperature is too low or too

high.

Adjust the temperature if neces-

sary. Follow the advice in the

user manual.

The display shows an error code

that is not in this table.

There is an electrical fault. Deactivate the oven with the

house fuse or the safety switch in

the fuse box and activate it again.

If the display shows the error

code again, contact the Custom-

er Care Department.

www.zanussi.com 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comentários a estes Manuais

Sem comentários

Zanussi ZCG92396XA Manual do Utilizador Página 21

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Zanussi ZCG92396XA