Zanussi ZCV65030WA Manual do Utilizador Página 24

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 23
LEVELLING OF THE APPLIANCE
Use small feet on the bottom of appliance to set the
appliance top surface level with other surfaces.
ANTI-TILT PROTECTION
CAUTION! Install the anti-tilt
protection to prevent the appliance
from falling under incorrect loads. The
anti-tilt protection only works when the
appliance is put in a correct area.
Your appliance has the symbols
shown on the pictures (if applicable)
to remind you about the installation of
the anti-tilt protection.
CAUTION! Make sure you install the
anti-tilt protection at the correct
height.
Make sure that the surface behind the appliance is
smooth.
1. Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
2. Install the anti-tilt protection 77 mm down from
the top surface of the appliance and 49 mm
from the left side of the appliance into the
circular hole on the bracket. See the illustration.
Screw it into the solid material or use
applicable reinforcement (wall).
3. You can find the hole on the left side at the
back of the appliance. See the illustration. Lift
the front of the appliance (1) and put it in the
middle of the space between the cupboards
(2). If the space between the bench cupboards
is larger than the width of the appliance, you
must adjust the side measurement to centre
the appliance.
1
2
49 mm
77 mm
ELECTRICAL INSTALLATION
WARNING! The manufacturer is not
responsible if you do not follow the
safety precautions from Safety
chapters.
This appliance is supplied without a main plug or a
main cable.
Applicable types of cables for different
phases:
Phase Min. size cable
1 not applicable
3 without neutral 4x1.0 mm²
WARNING! The power cable must
not touch the part of the appliance
shaded in the illustration.
24
Vista de página 23
1 2 ... 19 20 21 22 23 24 25 26 27 28

Comentários a estes Manuais

Sem comentários