Zanussi ZGL642TX Manual do Utilizador

ENZGL642User ManualHobGB IE

However, if the room has a door which opensdirectly to the outside no air vent is requiredeven if the volume is between 5 m³ and 11 m³.If there are ot

which are necessary for the type of gas youuse (see table in "Technical Information"chapter).4. Assemble the parts, follow the sameprocedure

A BCDEA) Green and YellowB) 3 amp fuseC) BrownD) Cord clampE) BlueThe wires in the cord are coloured as follows:Green and yellow - EarthBlue - Neutral

ABA) supplied sealB) supplied bracketsCAUTION!Install the appliance only on aworktop with flat surface.Possibilities for insertionThe panel installed

Bypass diametersBURNER Ø BYPASS 1/100 mmRapid 42Semi-rapid 32Auxiliary 28Other technical dataTOTAL POWER:Gas original: G20 (2H) 20 mbar = 8 kWGas repl

Energy efficiencyProduct information according to EU 66/2014Model identification ZGL642TXType of hob Built-in hobNumber of gas burners 4Energy e

www.zanussi.com/shop867315034-C-412014

ContentsSafety information 2Safety instructions 3Product description 5Daily use 6Hints and tips 7Care and cleaning 7Troubleshooting 8Installation 9Tec

• Unattended cooking on a hob with fat or oil can be dangerousand may result in fire.• Never try to extinguish a fire with water, but switch off theap

• Before carrying out any operation make surethat the appliance is disconnected from thepower supply.• Make sure that the electrical information onthe

• Do not let cookware to boil dry.• Be careful not to let objects or cookware fallon the appliance. The surface can bedamaged.• Do not activate the co

Control knobSymbol Descriptionno gas supply / off positionmaximum gas supplySymbol Descriptionminimum gas supplyignitionDaily useWARNING!Refer to Safe

The spark generator can startautomatically when you switch onthe mains, after installation or apower cut. It is normal.Turning the burner offTo put th

Be very careful when youreplace the pan supports toprevent the hob top fromdamage.2. The enamel coating occasionally can haverough edges, so be carefu

If you cannot find a solution...If you cannot find a solution to the problemyourself, contact your dealer or an AuthorisedService Centre. Give the dat