
What to do if…
Warning! Refer to the Safety chapters.
Problem Possible cause Remedy
The hob does not operate The heat setting is not set Set the heat setting
The oven does not heat up The oven is not switched on Switch on the oven
The oven does not heat up The clock is not set Set the clock
The oven does not heat up The necessary settings are not
set
Control the settings
The oven does not heat up The fuse in the fuse box is re-
leased
Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
The oven lamp does not operate The oven lamp is defective Replace the oven lamp
Steam and condensation settle
on the food and in the oven cavity
You left the dish in the oven for
too long
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
The display shows “12.00” A power cut Reset the clock
The residual heat indicator does
not come on
The cooking zone is not hot be-
cause it operated only for a short
time.
If the cooking zone must be hot,
speak to the Service Centre.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
Warning! Refer to the Safety chapters.
Technical data
Dimensions
Height 894-912 mm
Width 549 mm
Depth 600 mm
Top oven capacity 37 l
Dimensions
Main oven capacity 74 l
Location of the appliance
You can install your freestanding appliance
with cabinets on one or two sides and in the
corner.
18
www.zanussi.com
Comentários a estes Manuais