Zanussi ZGF642W Manual do Utilizador Página 17

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 18
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 16
18
Commissioning
When the hob has been fully installed it will be
necessary to check the minimum flame setting. To do
this, follow the procedure below.
- Turn the gas tap to the MAX position and ignite.
- Set the gas tap to the MIN flame position then turn
the control knob from MIN to MAX several times.
If the flame is unstable or is extinguished follow the
procedure below.
Procedure:
Re-ignite the burner and set to MIN.
Remove the control knob and use a thin
bladed screwdriver to turn the adjustment
screw until the flame is steady and does not
extinguish, when the knob is turned from
MIN to MAX.
The adjustment screw may be located at the
centre of the gas tap control shaft or on the
gas tap body, left of the control shaft or
below (see diagram).
Repeat the adjustment procedure for all
burners.
Pressure Testing
Remove left hand pan support and front left
burner cap and crown.
Fit manometer tube over the injector.
Turn on the burner gas supply and ignite
another burner.
The pressure reading should be nominally
20mbar and must be between 17 mbar and
25mbar.
Turn off the burner supplies.
Adjustment
screw
Vista de página 16
1 2 ... 12 13 14 15 16 17 18

Comentários a estes Manuais

Sem comentários

Sears 143.994006 manuály

Uživatelské manuály a uživatelské příručky pro Pro auto Sears 143.994006.
Poskytujeme 1 manuály pdf Sears 143.994006 ke stažení zdarma podle typů dokumentů: Uživatelský manuál






Další produkty a příručky pro Pro auto Sears

Modely Typ Dokumentu
580.32601 Uživatelský manuál   Sears 580.32601 User Manual, 41 stránky
608.718571 Uživatelský manuál   Sears 608.718571 User Manual, 6 stránky
52268 Uživatelský manuál   Sears 52268 User Manual, 16 stránky
300.7271 Uživatelský manuál   Sears 300.7271 User Manual, 5 stránky