Zanussi ZGX65424XA Manual do Utilizador

ENZGX65424XAUser ManualHobMA

Problem Possible cause RemedyThe flame ring is uneven. Burner crown is blocked withfood residues.Make sure that the injector is notblocked and the bur

Gas ConnectionWARNING!The following instructions aboutinstallation, connection andmaintenance must be carried out byqualified personnel in compliancew

5. If you change:• from natural gas G20 20 mbar to liquidgas, fully tighten the bypass screw in.• from liquid gas to natural gas G20 20mbar, undo the

min 5 mm(max 150 mm)min 30 mm60 mmBAA. Removable panelB. Space for connectionsKitchen unit with ovenThe electrical connection of the hob and theoven m

Gas burners for LPG G30/G31 28-30/37 mbarBURNER NORMALPOWERkWMINIMUMPOWERkWINJECTORMARK 1/100mmNOMINAL GAS FLOW g/hG30 28-30mbarG31 37 mbarTriple Crow

www.zanussi.com 15

www.zanussi.com/shop867329862-A-422016

ContentsSafety information 2Safety instructions 3Product description 6Daily use 6Hints and tips 8Care and cleaning 8Troubleshooting 9Installation 10Te

elements. Children less than 8 years of age shall be kept awayunless continuously supervised.• Do not operate the appliance by means of an external ti

InstallationWARNING!Only a qualified person must installthis appliance.WARNING!Risk of injury or damage to theappliance.• Remove all the packaging.• D

UseWARNING!Risk of injury, burns and electricalshock.• Remove all the packaging, labelling andprotective film (if applicable) before first use.• Use t

• Contact your municipal authority forinformation on how to discard the appliancecorrectly.• Disconnect the appliance from the mainssupply.• Cut off t

Burner overviewABDCCDABA. Burner capB. Burner crownC. Ignition candleD. ThermocoupleIgnition of the burnerAlways light the burner before youput on the

WARNING!Always turn the flame down orswitch it off before you remove thepans from the burner.Hints and tipsWARNING!Refer to Safety chapters.CookwareCA

Be very careful when youreplace the pan supports toprevent the hob top fromdamage.2. The enamel coating occasionally can haverough edges, so be carefu