Zanussi jetstream ZJD12191 Manual do Utilizador Página 29
- Página / 32
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
29
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability should
this safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
GREEN & YELLOW
BROWN
CORD CLAMP
BLUE
13 A
P1041
E
N
L
Mod. ..........
Prod. No. ...........
Ser. No. .........
M
od
. ..........
P
rod
. N
o
. ...........
S
e
r. N
o
. .........
P0042 BD
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
earth symbol or coloured green and yellow.
The wire coloured blue must be connected to the
terminal «N» or coloured black.
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
WARNING:
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely.
Should the appliance power supply cable neeed to be
replaced, this must be carried out by our Service
Force Centre.
Note
When the appliance is installed the power supply cable
must be accessible.
Permanent connection
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
The switch must not break the yellow and green earth
cable at any point.
- WASHER-DRYER 1
- ZJD 12191 1
- Important Safety Information 2
- Contents 3
- Your New Washer-Dryer 4
- Description of the Appliance 5
- The Control Panel 6
- RAIN) or (SPIN) programmes 7
- RINSE HOLD) 8
- 13 Programme progress display 9
- 14 Programme selector dial 9
- Programme information 10
- Operating Sequence 11
- ● select programme (D 12
- Drying only 13
- Automatic washing and drying 13
- (NON-STOP programme) 13
- Washing and Drying Hints 14
- And in which form? 15
- Which detergent? 15
- Wash Care Symbols 16
- Washing Programmes 17
- Special Programmes 18
- Drying Programmes 19
- Maintenance and Cleaning 20
- The dangers of freezing 21
- Emergency emptying out 21
- Something Not Working 22
- Service & Spare Parts 23
- 0870 5 929929 23
- Guarantee Conditions 24
- Installation Instructions 25
- Technical Specifications 25
- Unpacking 26
- Positioning 26
- Water inlet 26
- Water drainage 27
- Special conditions 28
- Levelling 28
- Electrical connection 29
- Permanent connection 29
- Building-in 30
- Recommendations regarding the 31
- © Electrolux plc 2005 32
Manuais e produtos relacionados com Máquinas de lavar Zanussi jetstream ZJD12191
(24 páginas)
(60 páginas)
(48 páginas)Metro Filler-Kit Overhead Units manuals
Owner’s manuals and user’s guides for Furniture Metro Filler-Kit Overhead Units.
We providing 1 pdf manuals Metro Filler-Kit Overhead Units for download free by document types: User Manual
Comentários a estes Manuais