Zanussi ZGL640TX Manual do Utilizador descarregar pdf (Página 19)

Carry out the building in of the hob as

follows:

• put the seals supplied with the

hob, on the edges of the cut out,

taking care that the seals meet

without overlapping;

• place the hob in the cut out,

taking care that it is centred;

• fix the hob with the relevant fixing

clamps, supplied with the

injectors kit , as shown in the

diagram. When the screws have

been tightened, the excess seal

can be removed.

The edge of the hob forms a double seal

which prevents the ingress of liquids.

Seal

Fitting the Hob into the Worktop

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sem comentários

Zanussi ZGL640TX Manual do Utilizador Página 19