Zanussi ZCG62256XA Manual do Utilizador descarregar pdf (Página 19)

Cleaning the oven door

The oven door has two panels of glass installed

one behind the other. To make the cleaning

easier remove the oven door.

WARNING!

The oven door can close if you try to

remove the internal panel of glass

when the door is still assembled.

Do not lose the screws.

1. Open the door fully and hold the two door

hinges.

2. Lift and turn the levers on the two hinges.

3. Close the oven door to the first opening

position (halfway). Then pull forward and

remove the door from its seat.

4. Put the door on a soft cloth on a stable

surface.

5. Use a screwdriver to remove 2 screws from

bottom edge of door.

1

1

6. Use a spatula made of wood or plastic or

equivalent to open the inner door. Hold the

outer door, and push the inner door against

the top edge of the door. Lift the inner door.

2

2

3

7. Clean the oven door with water and soap.

Clean inner side of the door. Dry the oven

door carefully.

When the cleaning is completed, install the

glass panels and the oven door. To install the

oven door, do the above steps in the opposite

sequence.

4

4

5

5

6

Replacing the lamp

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

WARNING!

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

www.zanussi.com 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comentários a estes Manuais

Sem comentários