Zanussi ZCM660NWC Manual do Utilizador descarregar pdf (Página 13)

Catalytic walls

The walls with a catalytic coating are self-

cleaning. They absorb fat which collects on

walls while the oven operates.

To support this self-cleaning process heat

the oven without any food regularly:

1. Open the oven door.

2. Remove all accessories from the oven.

3. Close the door.

4. Set an oven function.

5. Set the oven temperature to 250 °C and

let the oven operate for 1 hour.

6. Clean the oven cavity with a soft and damp

sponge.

Caution! Do not attempt to clean catalytic

surfaces with oven sprays, abrasive

cleaners, soap or other cleaning agents. This

may damage the catalytic surface.

Discolouration of the catalytic surface has

no effect on catalytic properties.

Oven lamp

Warning! Be careful when you change

the oven lamp. There is a risk of electrical

shock.

Before you change the oven lamp:

• Deactivate the oven.

• Remove the fuses in the fuse box or deacti-

vate the circuit breaker.

Put a cloth on the bottom of the oven to

prevent damage to the oven light and

glass cover.

1. Turn the glass cover counterclockwise to

remove it.

2. Clean the glass cover.

3. Replace the oven light bulb with applicable

300°C heat-resistant oven light bulb.

Use the same oven lamp type.

4. Install the glass cover.

What to do if…

Problem Possible cause Remedy

There is no spark when lighting

the gas

There is no electrical supply Make sure that the unit is connec-

ted and the electrical supply is

switched on.

There is no spark when lighting

the gas

There is no electrical supply Examine the house electrical in-

stallation fuse.

There is no spark when lighting

the gas

Burner cap and crown are placed

uneven

Make sure that the burner cap and

crown are in correct positions.

The flame is blow out immediately

after ignition

Thermocouple is not heated suffi-

cient

After lightning the flame, keep the

knob pushed for approximately 5

seconds.

The gas ring burns unevenly Burner crown is blocked with food

residues

Make sure that the injector is not

blocked and the burner crown is

clear of food particles.

www.zanussi.com

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comentários a estes Manuais

Sem comentários

Zanussi ZCM660NWC Manual do Utilizador Página 13

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Zanussi ZCM660NWC