Zanussi ZCM660NWC Manual do Utilizador descarregar pdf (Página 8)

Electric

• Put cookware on a cooking zone before you

start it.

• Stop the cooking zone before the end of the

cooking time to use residual heat.

• The bottom of pans and cooking zone must

have the same dimension.

Warning! Use pots and pans with bottom

applicable to the dimension of burner.

Do not use cooking vessels on the hotplate that

overlap its edges.

Burner Diameters of cookware

Rapid 160 - 280 mm

Semi-rapid 140 - 240 mm

Burner Diameters of cookware

Auxiliary 100 - 180 mm

Examples of cooking applications

Heat set-

ting:

Use to:

1 Keeping warm

2 Gentle simmering

3 Simmering

4 Frying / browning

5 Bringing to the boil

6 Bringing to the boil / quick frying /

deep-frying

Hob - Care and cleaning

Warning! Refer to "Safety information"

chapter.

Important! Risk of burns from residual heat!

Let the appliance cool down.

Clean the appliance after each use.

Always use cookware with clean bottom.

Warning! Switch the appliance off and let

it cool down before you clean it.

Warning! For safety reasons, do not clean

the appliance with steam cleaners or high-

pressure cleaners.

Warning! Do not use abrasive cleaners,

steel wool pads or acids, they can cause

damage to the appliance.

• To clean the enamelled parts, cap and

crown, wash it with warm soapy water.

• Stainless steel parts wash with water, and

then dry with a soft cloth.

• The pan supports are not dishwasher proof;

they must be washed by hand.

• Make sure you position the pan supports

correctly after cleaning.

• To make burners work correctly, make sure

that the arms of the pan supports are in the

centre of the burner.

• Be very careful when you replace the

pan supports to prevent the hob top

from damage.

After cleaning, dry the appliance with a soft

cloth.

Cleaning the electric hotplate

Scratches or dark stains have no effect on

how the appliance operates.

Removing the dirt:

1. Use the fine scouring powder or a scouring

pad to remove the dirt.

2. Clean the appliance with a damp cloth and

some detergent.

3. Heat the hotplate to a low temperature and

leave to dry.

4. To maintain the hotplates, rub in a little

sewing machine oil now and again and

then polish off with absorbent paper.

Important! For stainless steel edges of the

hob use cleaner for stainless steel.

The stainless steel edge of the plate can

be slightly discoloured as a result of the

thermal load.

8

www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comentários a estes Manuais

Sem comentários