Zanussi ZCM661NX Manual do Utilizador descarregar pdf (Página 19)

• If the gasket shows to be damaged, call you local

Service Centre. Do not use the oven until it has

been repaired.

Lid cleaning (model ZCM 661 NX)

The crystal lid can be dissasembled to allow a

better cleaning (see picture).

Clean the crystal lid only with warm water and

avoid the use of rough cloths or abrasive substances.

After a proper cleaning, carefully reposition the lid into

its hinges.

Balancing the lid (model ZCM 661 NX)

Appliances provided with crystal lids are

equipped with specially balanced springs, inserted in

the hinges at the back of the appliance, to allow the

lid to be closed smoothly and easily.

You can use a screwdriver to adjust the closure

of the lid. The necessary force for opening/closing the

lid can be increased by turning the adjusting screw 2

or 3 times as shown in the picture.

Controls - Sundries

Periodically check the condition of the flexible

pipe of gas connection and make it replaced by

skilled technicians as soon as it shows abnormalities.

Annual replacement is recommended.

Oven lamp replacement

Disconnect the appliance from the

electricity supply.

If the oven bulb needs replacing, it must comply

with the following specifications: electric power, 15 W/

25 W; electric rate, 230 V (50 Hz); resistant to

temperatures of 300°C; connection type: E14. These

bulbs are available from your local Service Force

Centre.

To replace the faulty bulb:

1. Ensure the oven is disconnected from the

electrical supply.

2. Turn the glass cover anticlockwise.

3. Remove the faulty bulb and replace it with the

new one.

4. Refit the glass cover.

5. Reconnect to the electrical supply.

)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sem comentários

Zanussi ZCM661NX Manual do Utilizador Página 19