Zanussi ZCV560MX Manual do Utilizador descarregar pdf (Página 17)

Anti-tilt protection

Warning! Install the anti-tilt protection to

prevent the appliance to fall with incorrect

loads.

Important! Make sure you install the anti-tilt

protection at the correct height.

How to install the anti-tilt protection

1. Set the correct height and area for the ap-

pliance before you attach the anti-tilt pro-

tection.

2. Make sure that the surface behind the ap-

pliance is smooth.

3. Install the anti-tilt protection 317 - 322 mm

down from the top surface of the appliance

and 80 - 85 mm from the side of the appli-

ance into the circular hole on a bracket.

Screw it into the solid material or use ap-

plicable reinforcement (wall). You can find

the hole on the left side at the back of the

appliance. See the illustration bellow.

4. If you changed the dimensions of the cook-

er, you must align the non-tip device cor-

rectly.

80-85

mm

317-

322 mm

Important! If the space between the bench

cupboards is larger than the width of the

appliance, you must adjust the side

measurement to center the appliance.

Electrical installation

The manufacturer is not responsible if you

do not follow safety precautions from the

chapter "Safety information".

This appliance is supplied without a main plug

and a main cable.

Applicable cable type: H05 RR-F with ade-

quate cross-section.

Warning! Before you connect the mains

cable to the terminal, measure the voltage

between phases in the house network.

Then, refer to the connection label at the back

of the appliance to use the correct electrical

installation

This order of steps prevents from installation

errors and damage to the electrical

components of the appliance.

17

www.zanussi.com

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Comentários a estes Manuais

Sem comentários