Zanussi ZCV65020WA Manual do Utilizador descarregar pdf (Página 23)

Levelling of the appliance

Use small feet on the bottom of appliance to set

the appliance top surface level with other

surfaces.

Anti-tilt protection

CAUTION!

Install the anti-tilt protection to

prevent the appliance from falling

under incorrect loads. The anti-tilt

protection only works when the

appliance is put in a correct area.

Your appliance has the symbols

shown on the pictures (if applicable)

to remind you about the installation

of the anti-tilt protection.

CAUTION!

Make sure you install the anti-tilt

protection at the correct height.

Make sure that the surface behind the appliance

is smooth.

1. Set the correct height and area for the

appliance before you attach the anti-tilt

protection.

2. Install the anti-tilt protection 77 mm down

from the top surface of the appliance and

49 mm from the left side of the appliance

into the circular hole on the bracket. See

the illustration. Screw it into the solid

material or use applicable reinforcement

(wall).

3. You can find the hole on the left side at the

back of the appliance. See the illustration.

Lift the front of the appliance (1) and put it

in the middle of the space between the

cupboards (2). If the space between the

bench cupboards is larger than the width of

the appliance, you must adjust the side

measurement to centre the appliance.

1

2

49 mm

77 mm

Electrical installation

WARNING!

The manufacturer is not responsible

if you do not follow the safety

precautions from Safety chapters.

This appliance is supplied without a main plug

or a main cable.

Applicable cable types: H07 RN-F, H05 RN-F,

H05 RR-F, H05 VV-F, H05 V2V2-F (T90), H05

BB-F.

www.zanussi.com 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Comentários a estes Manuais

Sem comentários