Zanussi ZEE6940FXA Manual do Utilizador descarregar pdf (Página 17)

• Make sure that there is an access to the

mains plug after installation.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• The appliance must not be connected with

an extension cable, an adapter or a multiple

connection (risk of fire). Check that the

ground connection is in conformity with the

standard and regulations force.

• The power cable must be placed in such a

way that it does not touch any hot part.

• Connect the appliance to the mains with a

device that lets to disconnect the appliance

from the mains at all poles with a contact

opening width of minimum 3 mm, eg. auto-

matic line protecting cut-out, earth leakage

trips or fuse.

• None of a parts of the connection cable can

not get a temperature 90°C. The blue neutral

cable must be connected to the terminal

block label with "N". The brown (or black)

phase cable (fitted in the terminal block con-

tact marked with "L") must always be con-

nected to the live phase.

Connection cable

Use only connection cable of type H05V2V2-F

T90 or equivalent type. Make sure that the ca-

ble section is applicable to the voltage and the

working temperature. The yellow/green earth

wire must be approximately 2 cm longer than

the brown (or black) phase wire.

Building In

min. 55 mm

min. 650 mm

560 mm

30 mm

480 mm

10 mm

11 mm

11 mm

A

3 mm

B

A

A) supplied seal

B) supplied brackets

Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must be easy

to remove and let an easy access in case a

technical assistance intervention is necessary.

min 20 mm

(max 150 mm)

30 mm

60 mm

b

a

a) Removable panel

b) Space for connections

17

www.zanussi.com

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Comentários a estes Manuais

Sem comentários