Zanussi ZEL63X Manual do Utilizador descarregar pdf (Página 11)

Check that the ground connection is in conformity with

the standard and regulations force.

• Connect the appliance to the mains with a device that

lets to disconnect the appliance from the mains at all

poles with a contact opening width of minimum 3 mm,

eg. automatic line protecting cut-out, earth leakage

trips or fuse.

• None of a parts of the connection cable can not get a

temperature 90°C. The blue neutral cable must be

connected to the terminal block label with "N". The

brown (or black) phase cable (fitted in the terminal

block contact marked with "L") must always be con-

nected to the live phase.

Connection cable

Use only connection cable of type H05 V2V2-F T90. Make

sure that the cable section is applicable to the voltage and

the working temperature. The yellow/green earth wire

must be approximately 2 cm longer than the brown (or

black) phase wire.

Assembly

min. 55 mm

min. 650 mm

550 mm

min. 100 mm

30 mm

470 mm

A - seal to remove

B - supplied brackets

Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must be easy to remove

and let an easy access in case a technical assistance in-

tervention is necessary.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Sem comentários

Zanussi ZEL63X Manual do Utilizador Página 11