Zanussi ZEV6642FBV Manual do Utilizador descarregar pdf (Página 12)

Problem Possible cause Remedy

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

You do not set the heat setting

for 10 seconds.

Activate the hob again and set

the heat setting in less than 10

seconds.

You touched 2 or more sensor

fields at the same time.

Touch only one sensor field.

There is water or fat stains on

the control panel.

Clean the control panel.

An acoustic signal sounds and

the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

You put something on one or

more sensor fields.

Remove the object from the

sensor fields.

The hob deactivates. You put something on the sen-

sor field .

Remove the object from the

sensor field.

Residual heat indicator does

not come on.

The zone is not hot because it

operated only for a short time

or the sensor is damaged.

If the zone operated sufficiently

long to be hot, speak to an Au-

thorised Service Centre.

Automatic Heat Up does not

operate.

The zone is hot. Let the zone become suffi-

ciently cool.

The highest heat setting is set. The highest heat setting has

the same power as the func-

tion.

You decreased the heat setting

to 0.

Start from 0 and increase the

heat setting.

You cannot activate the outer

ring.

First, activate the inner ring by

changing the heat setting.

There is a dark area on

the multiple zone.

It is normal that there is a dark

area on the multiple zone.

The sensor fields become hot. The cookware is too large or

you put it too near to the con-

trols.

Put large cookware on the rear

zones, if possible.

comes on.

Child Safety Device or Lock

operates.

Refer to "Daily use".

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comentários a estes Manuais

Sem comentários

Zanussi ZEV6642FBV Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Zanussi ZEV6642FBV