Zanussi ZGF699ITW Manual do Utilizador descarregar pdf (Página 17)

17

FO 2041

FO 2042

Fig. 5 Fig. 6

FO 0199

Carry out the building in of the hob as follows:

• put the seals supplied with the hob,

on the edges of the cut out: place

them along the side edges and at

8 mm from the front and rear edge,

as shown in Fig. 7, taking care that

the seals meet without

overlapping;

• place the hob in the cut out, taking

care that it is centred;

• fix the hob with the relevant fixing

clamps and screws, as shown in Fig.

8. When the screws have been

tightened, the excess seal can be

removed.

The edge of the hob forms a double seal which

prevents the ingress of liquids.

Fitting the hob to the worktop

Seal

Fig. 7

Fig. 8

!

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Comentários a estes Manuais

Sem comentários