Zanussi ZGF782ITX Manual do Utilizador

ENUser manualHobZGF782ITGB

Warning! Do not use abrasive cleaners, steel woolpads or acids. They can cause damage to theappliance.Scratches or dark stains on the surface have no

Problem Possible cause RemedyThe flame is blow out immediately af-ter ignition• Thermocouple is not heated suffi-cient• After lightning the flame, kee

Hob recess dimensionsWidth: 560 mmLength: 480 mmHeat inputTriple Crown burner: 4.0 kWRapid burner: 3.0 kWSemi-rapid burner: 2.0 kWAuxiliary burner: 1.

Environment concernsThe symbol on the product or on its packagingindicates that this product may not be treated ashousehold waste. Instead it should

14 www.zanussi.com

15www.zanussi.com

www.zanussi.com/shop 397215502-A-502011

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Product description _ _ _ _

pliance or hot cookware. Do not let the electricitybonds tangle.Installation• You must read these instructions. The manufacturer isnot responsible for

– Cut off the mains cable where it connects with theappliance and discard it.– Flat the external gas pipes if there are fitted.– Speak to your local a

When the final connection has been made, it is essentialthat a thorough leak test is carried out on the hob and in-stallation.Make sure that the main

Electrical RequirementsPermanent electrical installation must comply with the lat-est I.E.E. Regulations and local Electricity Board regula-tions. For

BAA) supplied sealB) supplied bracketsPossibilities for insertionKitchen unit with doorThe panel installed below the hob must be easy to removeand let

Symbol Descriptionminimum gas supplyOperationIgnition of the burnerWarning! Be very careful when you use open fire inkitchen environment. Manufacturer

If the burner accidentally goes out, turn the controlknob to the off position and try to light the burneragain after minimum 1 minute.The spark genera