Zanussi ZXE66X Manual do Utilizador Página 7

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 12
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 6
You use not correct cookware. The symbol
comes on and the cooking zone deactivates automat-
ically after 2 minutes.
You do not deactivate a cooking zone or change the
heat setting. After some time,
comes on and the
appliance deactivates. See the table.
The times of Automatic Switch Off
The heat setting
- - -
The cooking zone de-
activates after
6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch to increase the heat setting. Touch to de-
crease the heat setting. The display shows the heat set-
ting. Touch
and at the same time to deactivate
the cooking zone.
Activation and deactivation of the outer ring
You can adjust the surface you cook to the dimension
of the cookware.
To activate the outer ring touch the sensor field
.
The indicator comes on.
Do the procedure again to deactivate the outer ring. The
indicator goes out.
Automatic Heat Up
You can get the necessary heat setting in a shorter time
if you activate the Automatic Heat Up function. This func-
tion sets the highest heat setting for some time (see the
graphic), and then decreases to the necessary heat setting.
To start the Automatic Heat Up function:
1.
Touch
. comes on in the display.
2.
Touch
again and again until comes on in
the display.
1
2
3
4
5
6
7
8
9
10
11
0
123456789
3.
Immediately touch
again and again until the nec-
essary heat setting comes on. After 3 seconds
comes on in the display.
To stop the function touch
.
Power function
The Power function makes more power available to the
induction cooking zones. The Power function is activa-
ted for 10 minutes at most. After, that the induction cook-
ing zone automatically sets back to highest heat setting.
To activate, touch
, comes on. To deactivate,
touch
or .
Power management
The power management di-
vides the power between
two cooking zones in a pair
(see the illustration). The
power function increases
the power to the maximum
level for one cooking zone
in the pair. Automatically de-
creases the power in the sec-
ond cooking zone to a lower level. The display for the
reduced zone change between two levels.
Timer
Use the Count Down Timer to set how long the cooking
zone operates for only this one time.
Set the Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the
timer.
To set the cooking zone: touch
again and again
until the indicator of a necessary cooking zone
comes on.
To activate or change the Timer: touch
or of
the timer to set the time (
00
-
99
minutes). When
7
Vista de página 6
1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários