Zanussi ZCK95206WA Manual do Utilizador descarregar pdf (Página 22)

WARNING!

Put the mains plug into the

mains socket only if all parts are

back into their initial position.

There is a risk of injury.

4. Light the burner.

Refer to "Hob - Daily use" chapter.

5. Turn the knob for the hob to the minimum

position.

6. Remove the knob for the hob again.

7. Screw on slowly the bypass screw till the

flame becomes minimum and stable.

8. Put the knob for the hob back on.

Levelling

CAUTION!

Remove all the accessories from the

oven.

1. Open the lid of the appliance and

disassemble the lid, the pan supports and

all the burner assemblies.

2. Put the appliance on the sidewall on a clean

and smooth surface. Place each foot into a

separate hole, in the plinth, and rotate it

counterclockwise.

3. If the floor is not equally flat, use the

adjustable feet on the bottom of the

appliance to set a stable position for the

appliance.

To install all the accessories, do the first step in

an opposite sequence.

Anti-tilt protection

Set the correct height and area for the

appliance before you attach the anti-tilt

protection.

CAUTION!

Make sure you install the anti-tilt

protection at the correct height.

22 www.zanussi.com

1 2 ... 17 18 19 20 21 22 23 24

Sem comentários

Zanussi ZCK95206WA Manual do Utilizador Página 22