Zanussi ZCM660NWC Manual do Utilizador descarregar pdf (Página 18)

ABC

DE

A) Gas connection point (only one point is ap-

plicable for appliance)

B) Gasket

C) Adjustable connection

D) LPG pipe holder

E) Natural Gas pipe holder

The appliance is set to default gas, to

change the setting choose pipe holder

from the list. Always use the gasket sealing.

Adjustment to different types of gas

Warning! Let only an authorized person

do the adjustment to different types of gas.

This appliance is for operation with natural

gas.

With the correct injectors, you can also operate

it with liquid gas.

Warning! Before replacing the injectors,

make sure that the gas knobs are in the

Off position and disconnect the appliance from

the electrical supply. Let the appliance cool off

fully. There is a risk of injury.

Injectors replacement

1. Remove the pan supports.

2. Remove the caps and crowns of the burn-

er.

3. With a socket spanner 7 remove the injec-

tors and replace them with the ones which

are necessary for the type of gas you use.

4. Assemble the parts, follow the same pro-

cedure backwards.

5. Replace the rating plate (it is near the gas

supply pipe) with the one for the new type

of gas supply. You can find this plate in the

package supplied with the appliance.

If the supply gas pressure is changeable or dif-

ferent from the necessary pressure, you must fit

an applicable pressure adjuster on the gas sup-

ply pipe.

Adjustment of minimum level

To adjust the minimum level of the burners:

1. Light the burner.

2. Turn the knob on the minimum position.

3. Remove the control knob.

4. With a thin screwdriver, adjust the by-pass

screw position. If you change from natural

gas 20 mbar to liquid gas, fully tighten the

adjustment screw in. If you change from

liquid gas to natural gas 20 mbar, undo the

by-pass screw approximately 1/4 of a turn.

A

1

Minimum adjustment screw

5. Make sure the flame does not go out when

you quickly turn the knob from the maxi-

mum position to the minimum position.

Levelling

Use small feet on the bottom of appliance to

set same level of cooker top surface with other

surfaces

Anti-tilt protection

Warning! You must install the anti-tilt

protection. Install the anti-tilt protection to

prevent the appliance to fall with incorrect

loads.

18

www.zanussi.com

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comentários a estes Manuais

Sem comentários