Zanussi ZCV65340WA Manual do Utilizador descarregar pdf (Página 24)

Removing and cleaning the door

glasses

The door glass in your product can

be different in type and shape from

the examples you see in the images.

The number of glasses can also be

different.

1. Open the door fully.

2. Move the slider until you hear a click.

1

2

3. Close the door until slider locks.

4. Hold the door trim on the top edge of the

door at the two sides and push inwards to

release the clip seal.

1

2

1

5. Pull the door trim to the front to remove it.

6. Remove the glass panels.

To install panels follow the procedure in

reverse.

Replacing the lamp

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

WARNING!

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

The lamp glass cover is at the back

of the cavity.

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a suitable 300

°C heat-resistant oven lamp.

Use the same oven lamp type.

4. Install the glass cover.

Removing the drawer

WARNING!

When the oven is in use, heat can

build up in the drawer. Do not keep

flammable things in there (e.g.

cleaning materials, plastic bags,

oven gloves, paper, cleaning sprays,

etc.).

The drawer below the oven can be removed for

cleaning.

1. Pull the drawer out until it stops.

1

2

2. Lift the drawer at a small angle and remove

it from the drawer support rails.

Inserting the drawer:

1. To insert the drawer set the drawer on the

support rails. Make sure that the catches

engage correctly into the rails

24 www.zanussi.com

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comentários a estes Manuais

Sem comentários