Zanussi ZIF6471CB Manual do Utilizador descarregar pdf (Página 11)

When you switch between the modes

the heat setting is set back to 0.

Diameter and position of the cookware

Choose the mode applicable to the size and the

shape of the cookware. The cookware should cover

the selected area as much as possible. Place the

cookware centrally on the selected area!

Place the cookware with the bottom diameter

smaller than 160 mm centrally on a single section.

100-160mm

Place the cookware with the bottom diameter larger

then 160 mm centrally between two sections.

> 160 mm

FLEXIBRIDGE STANDARD MODE

This mode is active when you activate the hob. It

connects the sections into two separate cooking

zones. You can set the heat setting for each zone

separately. Use two left side control bars.

Correct cookware position:

Incorrect cookware position:

FLEXIBRIDGE BIG BRIDGE MODE

To activate the mode press until you see the

correct mode indicator . This mode connects three

rear sections into one cooking zone. The one front

section is not connected and operates as a

separate cooking zone. You can set the heat

setting for each zone separately. Use two left side

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Sem comentários

Zanussi ZIF6471CB Manual do Utilizador Página 11