Zanussi ZIF6471CB Manual do Utilizador descarregar pdf (Página 9)

To activate the function: touch . comes on

for 4 seconds. The Timer stays on.

To deactivate the function: touch . The

previous heat setting comes on.

When you deactivate the hob, you also

deactivate this function.

CHILD SAFETY DEVICE

This function prevents an accidental operation of

the hob.

To activate the function: activate the hob with

. Do not set the heat setting. Touch for 4

seconds. comes on. Deactivate the hob with

.

To deactivate the function: activate the hob with

. Do not set the heat setting. Touch for 4

seconds. comes on. Deactivate the hob with

.

To override the function for only one cooking

time: activate the hob with

. comes on.

Touch

for 4 seconds. Set the heat setting in

10 seconds. You can operate the hob. When you

deactivate the hob with the function operates

again.

OFFSOUND CONTROL (DEACTIVATING AND

ACTIVATING THE SOUNDS)

Deactivate the hob. Touch for 3 seconds. The

display comes on and goes out. Touch for 3

seconds. or comes on. Touch of the

timer to choose one of the following:

• - the sounds are off

• - the sounds are on

To confirm your selection wait until the hob

deactivates automatically.

When the function is set to you can hear the

sounds only when:

• you touch

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control panel.

POWER MANAGEMENT

• Cooking zones are grouped according to the

location and number of the phases in the hob.

See the illustration.

• Each phase has a maximum electricity loading of

3700 W.

• The function divides the power between

cooking zones connected to the same phase.

• The function activates when the total electricity

loading of the cooking zones connected to a

single phase exceeds 3700 W.

• The function decreases the power to the other

cooking zones connected to the same phase.

• The heat setting display of the reduced zones

changes between two levels.

HOB²HOOD

It is an advanced automatic function which

connects the hob to a special hood. Both the hob

and the hood have an infrared signal communicator.

Speed of the fan is defined automatically on basis

of mode setting and temperature of the hottest

cookware on the hob. You can also operate the fan

from the hob manually.

For most of the hoods the remote

system is originally deactivated.

Activate it before you use the function.

For more information refer to hood

user manual.

Operating the function automatically

To operate the function automatically set the

automatic mode to H1 – H6. The hob is originally

set to H5. The hood reacts whenever you operate

the hob. The hob recognizes temperature of the

cookware automatically and adjusts the speed of

the fan.

Automatic modes

Automatic

light

Boiling

1)

Frying

2)

Mode

H0

Off Off Off

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comentários a estes Manuais

Sem comentários