Zanussi ZGG640ITNC Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Fogões Zanussi ZGG640ITNC. ZANUSSI ZGG640ITNC User Manual [en] Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir

Resumo do Conteúdo

Página 1 - ZGG640ITNC

ENUser manualGas hobZGG659ICZGG640ITNCIL

Página 2 - Safety information

Hob recess dimensionsWidth: 550 mmLength: 470 mmHeat inputRapid burner: 2.45 kWSemi-rapid burner: 1.6 kWAuxiliary burner: 0.95 kWTOTAL POWER: G30/G31

Página 3 - Disposal of the appliance

Tel: 972-9-7448112Fax: 972-9-7603618e-mail:[email protected] 11

Página 4

www.zanussi.com/shop 397248001-A-412011

Página 5 - Possibilities for insertion

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Product description _ _ _ _

Página 6 - Operation

• If there is a crack on the surface, disconnect powersupply to prevent the electric shock.Installation• You must read these instructions. The manufac

Página 7 - Helpful hints and tips

– Cut off the mains cable where it connects with theappliance and discard it.– Flat the external gas pipes if there are fitted.– Speak to your local a

Página 8 - What to do if…

• Do not pull the mains cable to disconnect the appli-ance. Always pull the mains plug.• The appliance must not be connected with an extensioncable, a

Página 9 - Hob dimensions

Product descriptionCooking surface layout1 25 4 31Semi-rapid burner2Semi-rapid burner3Control knobs4Auxiliary burner5Rapid burnerControl knobsSymbol D

Página 10 - Packaging material

Warning! Do not keep the control knob pushed formore than 15 seconds.If the burner does not light after 15 seconds, release thecontrol knob, turn it i

Página 11 - Fax: 972-9-7603618

Care and cleaningWarning! Switch the appliance off and let it cooldown before you clean it. Disconnect the appliancefrom the electrical supply, before

Página 12 - 397248001-A-412011

Problem Possible cause Remedy • Burner cap and crown are placeduneven• Make sure that the burner cap andcrown are in correct positions.The flame is b

Comentários a estes Manuais

Sem comentários