Zanussi ZGG640ITNC Manual do Utilizador descarregar pdf (Página 8)

Care and cleaning

Warning! Switch the appliance off and let it cool

down before you clean it. Disconnect the appliance

from the electrical supply, before carrying out any

cleaning or maintenance work.

Warning! For safety reasons, do not clean the

appliance with steam cleaners or high-pressure

cleaners.

Warning! Do not use abrasive cleaners, steel wool

pads or acids, they can cause damage to the

appliance.

Scratches or dark stains on the glass have no effect

on how the appliance operates.

• You can remove the pan supports to easily clean the

hob.

• To clean the enamelled parts, cap and crown, wash it

with warm soapy water and dry it carefully before you

put them back.

• Stainless steel parts wash with water, and then dry with

a soft cloth.

• The pan supports are not dishwasher proof; they must

be washed by hand.

• When you wash the pan supports by hand, take care

when you dry them as the enamelling process occa-

sionally leaves rough edges. If necessary, remove

stubborn stains using a paste cleaner.

• Make sure you position the pan supports correctly after

cleaning.

• To make burners work correctly, make sure that the

arms of the pan supports are in the centre of the burn-

er.

• Be very careful when you replace the pan supports to

prevent the hob top from damage.

After cleaning, dry the appliance with a soft cloth.

Removing the dirt:

1. – Remove immediately: melting plastic, plastic foil,

and food containing sugar.

– Stop the appliance and let it cool down before

you clean: limescale rings, water rings, fat stains,

shiny metallic discolorations. Use a special

cleaner applicable for surface of hob.

2. Clean the appliance with a damp cloth and some de-

tergent.

3. At the end rub the appliance dry with a clean cloth.

Warning! Do not use knives, scrapers or similar

instruments to clean the surface of the glass or

between the rims of the burners and the frame (if

applicable).

Warning! Do not slide cookware over the glass

because it could scratch the surface. Also, do not let

hard or sharp objects fall onto the glass or hit the edge of

the hob.

Cleaning of the spark plug

This feature is obtained through a ceramic ignition candle

with a metal electrode. Keep these components well clean

to prevent difficult lighting and check that the burner

crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to

check the conditions of the gas supply pipe and the pres-

sure adjuster, if fitted.

What to do if…

Problem Possible cause Remedy

There is no spark when lighting the

gas

• There is no electrical supply • Make sure that the unit is connec-

ted and the electrical supply is

switched on.

• Control the fuse. If the fuse is re-

leased more than one time, refer

to a qualified electrician.

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

Zanussi ZGG640ITNC Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Zanussi ZGG640ITNC