Zanussi ZGG646ICN Manual do Utilizador descarregar pdf (Página 11)

550

470

580

510

55 min.

Fig. 9

This hob can be inserted in a built-in kitchen unit whose

depth is between 550 and 600 mm. The hob

dimensions are shown in Fig. 9.

The edge of the cut out must have a minimum distance

from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit near

the hob, the cut out edges must have a minimum

distance of 100 mm.

Hanging forniture units or hoods must be placed at 650

mm. minimum from the hob.

A = Auxiliary burner

SR = Semirapid burner

R = Rapid Burner

FO 2109

Fitting the hob to the worktop

Before fitting the hob into the cut out, an adhesive seal

must be fitted to the underside outside edge of the hob.

It is essential that no gaps are left in this seal in order to

prevent spillage near the hob seeping into the cabinet

below.

1) Remove the pan supports, the burners caps and

crowns and turn the hob upside down, taking care the

ignition candles are not damaged in this operation.

2) Place the relevant sealing all around the glass top

edge, taking care that the sealings meet without

overlapping (Fig. 8).

3) Place the hob in the cut out, taking care of its

centring.

4) Fix the hob with the relevant screws (Fig. 9).

Fig. 10

Fig. 11

FO 2320

a) sealing gasket

Dimensions are given in millimeters

Building In

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Zanussi ZGG646ICN Manual do Utilizador Página 11