Zanussi ZCC6600W Manual do Utilizador descarregar pdf (Página 13)

Close the oven door to

the first opening position

(halfway). Then pull for-

ward and remove it from

its seat.

Place the door on a

stable surface protected

by a soft cloth.

Use a screwdriver to re-

move 2 screws from bot-

tom edge of door

Important! Do not loose

the screws

Use a spatula made of

wood or plastic or equiv-

alent to open the inner

door

Hold the outer door, and

push the inner door

against the top edge of the

door

Lift the inner door

Clean inner side of the

door

Clean the glass panel with

water and soap. Dry it

carefully.

Warning! Only clean the glass panel with water and

a soap. Abrasive cleaning agents, stain removers

and sharp objects (e.g. knives or scrapers) can cause

damage to the glass.

Inserting the door and the glass panel

When the cleaning procedure is completed, insert the

oven door. To do so, do the steps in opposite way.

Stainless steel or aluminium appliances:

Clean the oven door with a wet sponge only. Dry it

with a soft cloth.

Do not use steel wool, acids or abrasive materials as they

can damage the oven surface. Clean the oven control

panel with the same precautions

Oven lamp

Warning! There is a danger of electrical shock!

Before you change the oven lamp:

• Switch off the oven.

• Remove the fuses in the fuse box or switch off the cir-

cuit breaker.

Put a cloth on the bottom of the oven for protection

of the oven light and glass cover.

Replacing the oven light bulb/cleaning the glass cover

1. Turn the glass cover anti-clockwise to remove it.

2. Clean the glass cover.

3. Replace the oven light bulb with applicable 300°C

heat-resistant oven light bulb.

4. Install the glass cover.

What to do if…

Problem Possible cause Remedy

The hob does not operate The heat setting is not set Set the heat setting

The oven does not heat up The oven is not switched on Switch on the oven

The oven does not heat up The clock is not set Set the clock

The oven does not heat up The necessary settings are not set Control the settings

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Comentários a estes Manuais

Sem comentários

Zanussi ZCC6600W Manual do Utilizador Página 13

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Zanussi ZCC6600W