Zanussi ZCE64010WA Manual do Utilizador descarregar pdf (Página 16)

WARNING! Danger of electrocution!

Disconnect the fuse before you

replace the lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

The lamp glass cover is at the back of

the cavity.

1. Turn the lamp glass cover counterclockwise to

remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a suitable 300 °C

heat-resistant oven lamp.

Use the same oven lamp type.

4. Install the glass cover.

REMOVING THE DRAWER

WARNING! Do not keep flammable

items (such as cleaning materials,

plastic bags, oven gloves, paper or

cleaning sprays) in the drawer. When

you use the oven, the drawer can

become hot. There is a risk of fire

The drawer below the oven can be removed for

cleaning.

1. Pull the drawer out until it stops.

2. Lift the drawer slightly, so that can be lifted

upwards at an angle of the drawer guides.

To install the drawer, follow the procedure in

reverse.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

WHAT TO DO IF...

Problem Possible cause Remedy

You cannot activate the appli-

ance.

The appliance is not connec-

ted to an electrical supply or it

is connected incorrectly.

Check if the appliance is cor-

rectly connected to the electri-

cal supply.

You cannot activate the appli-

ance.

The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The necessary settings are not

set.

Make sure that the settings are

correct.

The lamp does not operate. The lamp is defective. Replace the lamp.

Steam and condensation settle

on the food and in the cavity of

the oven.

You left the dish in the oven for

too long.

Do not leave the dishes in the

oven for longer than 15 - 20

minutes after the cooking

process ends.

SERVICE DATA

If you cannot find a solution to the problem yourself,

contact your dealer or an Authorised Service

Centre.

The necessary data for the service centre is on the

rating plate. The rating plate is on the front frame of

the appliance cavity. Do not remove the rating plate

from the appliance cavity.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comentários a estes Manuais

Sem comentários

Zanussi ZCE64010WA Manual do Utilizador Página 16

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Zanussi ZCE64010WA