Zanussi ZCE64010WA Manual do Utilizador descarregar pdf (Página 18)

CAUTION! Make sure you install the

anti-tilt protection at the correct

height.

Make sure that the surface behind the appliance is

smooth.

1. Set the correct height and area for the

appliance before you attach the anti-tilt

protection.

2. Install the anti-tilt protection 176 mm down

from the top surface of the appliance and 24

mm from the left side of the appliance into the

circular hole on the bracket. See the illustration.

Screw it into the solid material or use

applicable reinforcement (wall).

3. You can find the hole on the left side at the

back of the appliance. See the illustration. Put

the appliance in the middle of the space

between the cupboards (1). If the space

between the bench cupboards is larger than

the width of the appliance, you must adjust the

side measurement to centre the appliance.

24 mm

176 mm

ELECTRICAL INSTALLATION

WARNING! The manufacturer is not

responsible if you do not follow the

safety precautions from Safety

chapters.

This appliance is supplied with a main cable and

without a main plug.

WARNING! The power cable must

not touch the part of the appliance

shaded in the illustration.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Sem comentários

Zanussi ZCE64010WA Manual do Utilizador Página 18